Fix Screen Tearing Without Vsync: Become an Expert at Debugging

You can fix screen tearing without vsync by adjusting and synchronizing the monitor’s refresh rate and the graphics card frame rate. This error can usually happen with your gaming monitor, and experts also refer to it as a screen tear or an input lag. In addition, there are certain values you should change inside the control panel to reduce screen tearing and have high FPS.

By the time you are done reading our comprehensive guide, you will become an expert at knowing all the steps you should take in order to debug this error.

Why Is Fix Screen Tearing Without Vsync Happening?

The fix screen tearing without vsync error can happen for a number of reasons, and some of the most common ones are not having a proper frame limit, not enabling the adaptive vsync, or not having properly synchronized refresh rates and frame rates. This will result in a horizontal split at single or multiple places on your hz monitor. In addition, it would be a great idea to enable Fast Sync, Free Sync, Variable Refresh Rate, or Enhanced Sync, which might solve the issue immediately.

However, screen tearing can also occur if your current frame’s rate is significantly lower than your display’s refresh rate. This way, however, the terrible performance of your monitor is manifested by low FPS, which sounds more annoying than having occasional tears. Fortunately for us, there are simple solutions you could do to fix the screen tearing without affecting the performance of your computer. Keep reading the following section to learn more.

How To Fix This Error

The easiest solution to the screen tearing without vsync error is done by enabling the NVIDIA vsync. This change will automatically adjust the required values and prevent the error from happening again. In addition, however, you can play around with the monitor’s refresh and frames rate manually until you find the most optimized values.

To better understand the methods you can use to debug this error easily, look at the following bullet list that points them out:

• Changing the monitor’s resolution and refresh rate
• Disabling or enabling your NVIDIA vsync option
• Disabling all full-screen optimizations and “game-modes”
• Checking the graphics drivers for any errors
• Turning the frame limiter off
• Disabling the smooth scrolling option
• Using a power plan aimed at improved and high performance
• Using a different browser might be an easy fix

As this list shows, there is no one solution that will solve this problem, and if the first one does not work, you should try the rest. This list, however, does not thoroughly explain the steps you are supposed to do to solve the error without affecting other settings. Therefore, we will show and explain the most commonly used methods in the following sections of this article. Let us begin with the most obvious solution that will only take a couple of minutes to finish, shall we?

– Changing the Refresh and Resolution Rates

The most common reason for the vertical line on your screen and the input lag is having incorrect refresh and resolution rates. You should know how to change them adequately and adjust the values to your preference based on the monitor’s settings. The complete process consists of several steps, and we will teach you how easy it is to complete.

The following ordered list will explain the necessary steps, so keep reading to learn more:

1. Locate the resolution settings by pressing Start + S and typing inside the dialogue box. The application that comes out first is the one you need.
2. Navigate the settings and open the “Advanced display settings” menu located at the bottom of the page.
3. A different window will pop up containing all the details of your display. Select the “Display adapter properties for Display 1” option under the properties.
4. You will see the hardware properties now. Click “List all modes” inside the “Adapter” tab.
5. The different resolutions supported by your browser will appear. Adjust the resolutions according to the hardware specifications of your monitor and click “OK.”
6. Restart your computer to confirm and update the changes. Open the settings again and see whether they are saved. After completing this process, the screen tearing error should not appear again.

Following these steps carefully is all it takes to effortlessly remove the annoying error from your monitor. If you still have the same problems, continue to the next section of this guide.

– Enabling or Disabling Nvidia Vsync

NVIDIA provided the vsync option to solve any problems concerning tears and monitor rate stuttering. As discussed previously, the screen tear appears due to certain rates being higher than the value the system can handle. This problem can easily be solved with the vsync setting because it counters the issue with the controller using automatically adjusted rates and values. We will explain the necessary steps you should take to solve this error using NVIDIA vsync:

1. Right-click anywhere on the Desktop to select the NVIDIA Control Panel.
2. Open 3D Settings and select the “Manage 3D Options” button.
3. Click the Global Settings tab in the same window located on the right side of the screen.
4. Click the Vertical Sync option, and you can select whether to turn the function on or off.
5. Save the settings by selecting “Apply” and exiting the Panel.
6. Restart your computer and check whether the changes have been applied and if the problem is fixed.

These are the few necessary steps you should do to enable or disable the NVIDIA vsync. In addition, you should know that for AMD users, there is an option called “Wait for Vertical Refresh” that must always be turned on.

If you think this is the last solution we have, we have much more in store for you. The following section of this guide will teach you how to solve the screen tearing error using other full-screen optimizations.

– Disabling Full-screen and Game Mode Optimizations

One of the latest features in the most recent Windows update was the introduction of the Game Mode feature. This option allows users to optimize their systems and play games without any issues or errors. Instead, the operating system scans the program as a game and attempts to provide maximum performance while processing the data.

This feature allows users to record gameplay, stream across all devices and platforms, and take screenshots with a single click. However, this function may sometimes cause a screen tearing bug, as many users have reported so far. Let us learn how you can disable it in the following list:

1. Press Windows + S, type “Settings” and open the application from the dialogue box.
2. Find the Gaming tab inside the same window and click it.
3. Click the Game bar option and turn the “Record game clips, screenshots, and broadcast using Game bar” off. In addition, select Broadcasting and turn the “Record audio when I broadcast” off.
4. Restart your computer to confirm and update the changes. Open the settings again and see whether they are saved. The screen tearing error should not appear again.

If the same error persists, try disabling the full-screen optimizations for the specific game you are playing. This is done through the Compatibility tab inside the Game properties. Then, check the “Disable fullscreen optimization” dialogue box, apply the changes, and click OK. The problem should now be gone.

Finally, we will show you one more simple solution.

– Checking All Graphics Drivers

In case none of the above-mentioned methods work, our final solution is to check your drivers. First, you have to confirm whether they have the most optimized version for the monitor. If the driver has the latest version and the monitor is not compatible, you have to downgrade it.

On the other hand, you have to update the driver if it has an older version. Doing this is easy, and if you want to learn how it’s done, look at the following list:

1. Boot your computer into safe mode by pressing Windows + R and locate the device manager containing the NVIDIA hardware. Right-click it and select the Uninstall device option. Reboot your computer.
2. With most computers, the default drivers will be installed against the hardware. Select the “Scan for hardware changes” option if this does not happen with your computer.
3. Update the current drivers using the “Update driver” option inside the same window. Select the first option and wait for the updates.
4. Restart your computer.

You should always check the compatibility of your monitor with the driver versions. However, after carefully following the steps in this section, you will no longer see the same error on your monitor. In the following section, we will summarize the most important points from this guide.

Final Summary

You can fix screen tearing without vsync by adjusting and synchronizing the monitor’s refresh rate and the graphics card frame rate. This guide provided a closer insight into the different methods you can use to fix this error, and it also explained the following important points:

• Depending on the type of your monitor, take note that this error can even affect the most high-end set-ups.
• The most common reason for this error is the unsynchronized values for the frame and refresh rates that affect the normal flow.
• Several methods can fix this error, but the most effective one is adjusting the values for certain rates.
• If the first solution provided in this article does not work, move on to the next and follow the steps.
• You may sometimes update or downgrade the current version of your driver to fix this error.

Nothing could have taught you better about what it takes to fix this error than this comprehensive guide. So if you find yourself facing this tear on your screen, rest assured that there is an easy way out.